Sturdy construction: Vibration-reducing base housing of cast steel, neatly CNC-processed and powder-coated. For stability and working without vibrations. Extremely light magnesium saw arms reduce the weight of the mass moved by approx. 40% compared to die-cast aluminium. For smooth running and clean cuts. 460mm throat!

Magnesium saw arms precisely mounted on bearings: Extremely light and firm with a slender-shaped cutting area for an unobstructed view of the work piece. Chip blowing device with adjustable nozzle. Additional suction connection to connect a vacuum cleaner.

Large saw table made of die-cast aluminium (400 x 250mm). For easier saw blade replacement, it can be unlocked and pushed back (see description at top right). Regular scroll saw blades are fastened by saw blade holders with high clamping force: This ensures true alignment in the saw arm! The machine has also been prepared for saw blades with pin ends that are used without blade holders. Extremely important for these types of scroll saws: A handy adjusting knob enables sensitive clamping of the saw blades!

Table angle adjustment possible from 5° to 50°.

Cutting performance in wood 60mm, in non-ferrous metals (depending on type) 10 - 15mm. Also easily cuts Plexiglas, glass fibre reinforced plastic, foam, rubber, leather or cork. Includes 5 each coarse and fine saw blades.

Blade holders for DS 460 (one pair is already included with the machine)
For clamping regular saw blades with high clamping force: for true alignment of the saw arm.

NO 27 096 2 pieces (voir photo N°4)

Lames Proxxon, vivement conseillées:

"Super-Cut" scroll saw blades without pins. 130mm.

For cutting hard and soft woods, plastic, Perspex and soft non-ferrous metal.


Coarse-toothed blades (No. 9: 14 teeth per 25mm)
NO 28 116 130 x 1.50 x 0.48mm 12 pieces

Standard-toothed blades (No. 5: 17 teeth per 25mm)
NO 28 117 130 x 1.20 x 0.38mm 12 pieces

Fine-toothed blades (No. 3: 34 teeth per 25mm)
NO 28 118 130 x 0.80 x 0.34mm 12 pieces


Hard materials such as steel and PERTINAX.


Standard-toothed blades (No. 5: 36 teeth per 25mm)
NO 28 112 130 x 0.85 x 0.4mm 12 pieces

Fine-toothed blades (No. 3: 41 teeth per 25mm)
NO 28 113 130 x 0.75 x 0.36mm 12 pieces

Very fine-toothed blades (No. 1: 50 teeth per 25mm)
NO 28 114 130 x 0.60 x 0.3mm 12 pieces


Spiral blade. 125mm long with plain ends (without pins).


These blades cut all directions and obviate the turning of the workpiece (advantageous, especially with bigger workpieces). A 1.5mm hole is required. Ideal for plastic, hard and soft woods.

NO 28 747 125 x 1.2mm 12 pieces


Standard scroll saw blades with pin ends. 127mm.



Coarse-toothed (10 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
NO 28 741 127 x 2.61 x 0.51mm 12 pieces

Normal toothed (18 TPI per 25mm)
For cutting thin materials, soft and hard wood as well as plastics.
NO 28 743 127 x 1.86 x 0.24mm 12 pieces

Fine-toothed (25 TPI per 25mm)
For cutting non-ferrous metals, glass-fibre reinforced plastics, plastics, Plexiglas and wood.
NO 28 745 127 x 1.76 x 0.25mm 12 pieces

Note:
When cutting extremely hard work pieces (iron), the toothing in the contact area becomes worn relatively quickly. The upper part of the blade toothing can be used by increasing the work piece support surface.